5X 10mm 4 Pin RGB 5050 3528 LED Strip Light PCB Connectors Adapter Cable for TV Backlight Cupboard Strips

If you actually understand how these work then you will have no problem using them. They will only work with certain LED strips. I'm using 5050 SMD strips with these and they work perfectly to connect them to a controller. They can be connected in reverse by mistake (if you cut the wrong end of the LED strip) which will result in them not working at all, so make sure you don't do this.The physical connection is very secure once closed. It would take a lot of force to forcefully remove the connector. Highly recommended.

I used these as part of an installation of 2 x 5mt RGB Govee strips. These adaptors are designed for 10mm strips. They also come with a handful of male adaptors for easy connection to the LED controller lead.As I needed to cut the 5mt LED strip into two separate strips, these adaptors were needed to connect the second strip to the same controller. The adaptors include small arrow markers on the black 4 pin connector to help you get the polarity the right way round. The cut LED strip slides snuggly into the white connector. You do need to gently raise the 4 contact pins slightly first, to allow the strip to slide all the way in. When you close the clasp, the contact pins are then pushed firmly down onto the contact points on the LED strip.I only needed to use 2 of these adaptors, but was glad to have a few spare as the black 4 pin plug on one adaptor did come apart.It's also worth noting that the weight of these did cause the LED strip to start peeling away from the wall. I ended up securing the connector to the wall with some double-sided tape to stop this.Ultimately, they worked as designed & expected. However I'm only awarding 4 stars due to the one faulty adaptor.

These have been great for re designing the kitchen lighting, allowing me to split a 7.5 mtr length of Govee LED into smaller strips that I could then place in the right areas under my kitchen wall units.

The media could not be loaded. Very useful item to connect two lengths of LED light strip for what ever reason. Please be aware that not all LED strip connections are the same, see picture. Bought the LED stripes from same company and connections are different, one was 5V BRG and the other was 5V GRB. They will still work, however the two LED stripes will be different colours.

Unable to use this item as there are no instructions and, despite having fitted lights like these before, \fter an hour of head scratching and several attempts item was useless

Amazing didn’t realise how many I would receive!! I’ve got loads and only needed one. But amazing value for money !!

Excellent

Worked so much better than I expected, one end fitted to the light strip and the four pins fit exactly into the power supply, it was like a hallelujah moment.