BTF-LIGHTING 5050 RGBW 4in1 LED Strip RGB+Warm White(2700K-3000K) 24V

Seems good quality and the LEDs are nice and bright. Can be cut into sections of 100mm which contains 6 LED chips.The strip is 12mm wide and a full roll on at full brightness uses about 3.5A so make sure you buy a big enough PSU.When cut into sections and run off a DMX decoder you can achieve some really good effects with this strip.

The length is amazing and the brightness is perfect very easy to install comes with only one warm color range light still the quality is amazing

Colours are very intense, but after carefull installation into aluminium profile on led coving a section of the red channel has stopped working within days of installation.It's all stuck down so I can't remove it to return, to fix it I would just solder in a repair section.

Tutto perfetto

Apparentemente fatta bene ma:PRO:1. piuttosto luminosa se piazzata in contesti di retroilluminazione ( scrivania, tv, mobili,…)2. È solo la strip, quindi grande libertà di scelta degli altri componenti (alimentazione, controller, remote)CONTRO:1. (GRAVE!!) La cablatura non è conforme: i colori sono disposti nell’ordine GRBW piuttosto che RGBW. Necessario quindi invertire i cavi R e G in fase di installazione (per attaccarla ad un controller o ad un’ altra strip)2. Del bianco caldo non c’è traccia minimamente!3. Scalda parecchio4. Biadesivo non 3M che non mi da molta fiducia nemmeno a guardarlo. Credo sia assolutamente necessario un profilo o altro nastro/colla…vedrò quando lo piazzerò5. Piuttosto costose (sono cmq una cinesata)Speriamo nella durata… per il costo che hanno mi aspetto almeno 100 anni!

After initial testing, this is an excellent product. I bought 5 different styles of LED strip to test out in order to find which ones I wanted to use for my house lighting.This strip outperformed all the others that I bought in every way. It's very bright, the colors are very nice, and the warm white is very pleasant. Also, because it uses the 4 in 1 LEDs, all LEDs on the strip are always lit up evenly whether you have it set to a pure white or a mixed white or a pure color or mixed color. This is important because my preference is for a finished project with LEDs that aren't noticeable, and to be, rather, strips of even diffuse light.I haven't adhered them to anything yet, but because I'm using aluminum channel with diffuser covers, I may not even be able to tell how well the adhesive performs very accurately, so I am not leaving any rating for the adhesive.The 24v strip has the further advantage over an equivalent 12v strip of having less voltage drop per given length of strip due to lower current, and lower current makes everything easier in the long run, by allowing smaller gauge wire to power each strip vs the same length wire run for 12v. For my applications, concealment of wires leading to the led strips is important, so being able to use a smaller gauge wire is great, even if the difference is minimal. I would say that for large projects, the requirement of a relatively high current output 24v power supply is harder to acquire than a 12v supply, particularly because I had already planned on using an HP 1200w server power supply, but ultimately it just means I have to use two 12v server PSUs in series, which is not really a bother. Please note, I don't advise using power supplies in series unless you are confident in what you are doing, as wiring something like those server PSUs in series without removing the ground on the AC power cords is a quick way to convert the power cords into magic smoke.

Ich bin mit den LED Streifen sehr zufrieden, sie sind Hell und die Farben passen auch. Ich habe sie genutzt um bei meiner TV Wand einen Hintergrundbeleuchtung zu bauen

Installé en corniche avec profilé et diffuseur. Rendu très beau, installation simple avec les connecteurs rapides.Gestion via passerelle DMX intégré à une domotique.Livré en 2 jours ouvré.RAS.