Pyle Speaker Stand Pair of Sound - Play 1 and 3 Holder, Telescoping Height Adjustable from 26” - 52” Inch, High Heavy Duty Three-point Triangle Base w/ Floor Spikes and 9” Square Platform, Black

These stands are awesome! I'm able to adjust them to the proper height for my studio mixing. They are very stable on carpet thanks to the pointy bits you can screw into the bottom. I'm not as concerned with cable management, but it shouldn't be an issue. All my cables will run behind my workstation. They are a good weight, not too heavy, but heavy enough and solid. They hold my Yamaha 4 inch monitors with ease. I recommend these for an affordable studio monitor stand.

The instructions were not the best but I was able to figure out the top and bottom screws were in the extension rods, not in the bag of parts. After that, putting the speaker stands together was simple. They are strong and well made. The triangle base is not as stable as I like but I put these stands next to my desk and then canted the speakers in about 30 degrees off axis to angle the speakers at me. My speakers are old-school Polk Audio Studio 2 bookshelf speakers that weigh 17 pounds each so they will be slightly top heavy when off-axis to the base. I think if the speakers aimed on-axis to the triangular base they would be fine. I am very happy with these speaker stands.

Exactly as described and expected. Would buy again.

I replaced the first one I got because I thought the long screws with washers for the top and bottom were missing as many reviews say. Then found out they are already screwed into the pole ends, but also there’s only 1 washer (you don’t need another it doesn’t seem like) and the screws are different lengths unlike the instructions portray. I have KEF Q1s which are 7”x10.5” so a little longer than the mount, however the pads you put on top + my speaker rubber feet, the speaker doesn’t move or slide at all. The only worry is the speakers are very top heavy and wobbly, if you even lightly bump them they tip, but I guess because of the triangle base they usually wobble back upright and don’t actually fall over. I may add a weight to the base to secure it more. All around nice speaker stands.

These speakers are lightweight yet robustly constructed for stand use, capable of handling the bass output of speakers. They offer exceptional stability, remaining stationary during playback. The bass quality has been noticeably improved. They are compatible with 5-inch speakers and should be able to handle 8-inch or slightly larger speakers. The adjustment mechanism is straightforward, and the locking system ensures secure placement. However, it would be beneficial if they provided straps or a designated area for cable management, allowing for hidden or organized cable management.

I never had stands before! What a difference it makes, especially with proper foam pads to isolate and absorb vibrations! The height being adjustable is AN AWESOME FEATURE! Easy to construct, came with everything needed! Awesome they came with carpet spikes too! I am currently learning how to mix songs, and record my music, getting a better understanding each day! These also make more room for equipment/and workspace on my desk! Totally a game changer! I don’t have a point of comparison, but I am hoping these hold up. Now, I’m off to find a subwoofer stand/desk for behind my monitors (center stage) I can’t wait to listen to music in my daw now that my stereo field is a bit wider… Be interesting to hear the difference there too! Word to the wise, buy these if you don’t want your speakers to take up desk space! Would buy again!

Been using this for years and I was so afraid that it won’t be able to hold my speaker if my cats jump on it but after been using it for 3 years, 0 accidents happened, really solid safety for my speakers and the height is adjustable

Meh….. more disappointment than appreciation. Quite frankly more reminiscent of a car jack stand that is extra tall than a speaker stand. The jack stand likely is more adjustable. They are good quality stands overall though. It just the styling and limited adjustability of stand height for me. These stands are very sturdy, but adjustable only to set intervals in height I was not expecting using a pin to hold height position. Center post is huge. For use in a living room unless you are going for commercial band and audio set up, they are just look way too commercial and heavy duty looking to part a home decor. Speakers can only sit on top with no way to secure your likely expensive speakers to the stands. I am in constant fear my speakers are going to knocked off the stands and damaged or destroyed. In the end the price was good, but I will be looking to replace these stands. They look like a stand to hold a Saturday afternoon visiting bands speakers for a few hours. But are just way to heavy duty industrial looking, and not for me in the end. Wishing I had returned them to be honest. Consider using a strap to hold your speakers securely on the top, or drilling holes into the top plate secure your speakers to the stand with screws a permanent mounting use for you (if that is even a option for the speakers you are using). If you are aiming speaker stands that looks like they could be part of a garage band or weekend band at a bar set up, then these are what you are looking for. If that is not the look you want, you will disappointed like I am.

as shown

Pieds basiques mais efficaces. Alors attention, la mesure exacte de la base est bien 46x46x46 (et non 36x36x36 comme indiqué à certains endroits). La forme triangulaire permet de s'adapter assez facilement mais vous voila prévenu, les dimension en sont pas anodines. Pour la qualité de fabrication c'est très bien. Dans mon cas utilisé avec des Presonus ERIS 5BT (il reste encore de la largeur sur les côtés et à l'arrière). La stabilité est correcte mais à mon avis il faut éviter de placer les pieds dans un passage fréquenté, ne serait-ce que pour la base "imposante" et étonnement coupante. J'ai faillis enlever une étoile pour cela mais bon, ce n'est pas comme si cela ne se voyait pas dans les descriptif produit ! Pour le reste, donc les réglages, on peut aussi bien utiliser la fonction de blocage télescopique et/ou avec la cheville pour bloquer les interstices de manière sécurisée (dans cas impossible que la barre glisse). Dans mon cas j'ai opté pour le 1er cran, correspondant approximativement à 80cm de hauteur (je ne suis pas dans un studio d'enregistrement, juste un bureau pour lequel j'améliore mon confort d'écoute + espacement). Dernier détail que j'avais pas trouvé ailleurs (sauf mauvaise lecture de ma part) : on peut orienter à souhait, à l'horizontale, la plateforme / plaque sur laquelle repose chaque enceinte. Pour finir le "montage" est parfaitement aisé. 2 vis et c'est tout.

Ich habe mir die Pyle Lautsprecherständer für mein kleines Heimstudio geholt, um meine aktiven Nahfeldmonitore besser auf Ohrhöhe zu bringen – und bin rundum zufrieden! 🛠️ Aufbau & Verarbeitung: Die Ständer waren in wenigen Minuten aufgebaut. Alles ist gut verpackt und verständlich beschriftet. Die Konstruktion wirkt stabil und solide, kein Wackeln oder unsauber verschweißte Teile. Die Rohre sind aus pulverbeschichtetem Metall und machen einen langlebigen Eindruck. 📏 Höhenverstellbar & sicher: Die Höhenverstellung funktioniert stufenlos über einen Sicherheitsbolzen + Drehknopf – einfach, aber effektiv. Ich nutze sie aktuell auf mittlerer Höhe (ca. 120 cm) und sie halten meine ca. 8 kg schweren Lautsprecher absolut sicher. 🔊 Stabilität & Standfestigkeit: Auch bei höherer Belastung stehen die Stative sicher – kein Kippen oder Wackeln, selbst auf Laminat. Die Gummifüße sorgen für festen Halt und schonen gleichzeitig den Boden. Ideal auch für den mobilen Einsatz auf kleinen Bühnen oder bei Veranstaltungen. 🎛️ Vielseitigkeit: Ob im Heimstudio, im Proberaum oder für DJ-Setups – die Ständer passen für viele Lautsprechertypen mit Standard-35-mm-Aufnahme. Praktisch: Die Tragetasche ist inklusive und macht den Transport angenehm einfach. Fazit: Wer robuste, höhenverstellbare Lautsprecherständer zu einem fairen Preis sucht, wird hier fündig. Kein Schnickschnack, aber genau das, was man braucht – zuverlässig, funktional und sauber verarbeitet. Ich würde sie jederzeit wieder kaufen.

Excelentes. Buen soporte de bocinas y lo ilportamte es que no vibra el soporte

Nice