iJDMTOY Compatible with BMW Front Hood or Rear Trunk Lid, Xenon White 3.25-Inch 82mm Roundel LED Emblem Background Illumination Lighting Kit

It looks and works great hundred percent satisfied

No serious complaints with the product. The item can be easy to install AFTER you've done your research. Not every BMW trunk roundel/emblem is identical. Some require more or less work to remove. In my case I needed to remove the entire roundel, and pop the BMW badge off from inside the roundel. Once that was done, I adhered the LED between the roundel and the badge, routed the wire through the back of the roundel, then through one of the preexisting holes in my trunk (2 holes are pre-drilled into the trunk to hold the roundel in place). I added some additional double sided tape (Gorilla brand) and adhered the roundel back to my trunk. I then routed the wiring down to one of the license plate lamps. I tapped into the wire for the license plate lamps using Low Voltage T Tap Wire Connectors from Brightfour (also from Amazon). After that, it was a done deal. Popped the license plate lamp back in place. Love the look! Prior to installing, I researched: how to remove my roundel, how to use T-tap wire connectors, and how to remove my license plate lamp. This is on a 2011 BMW X6 (E71). Pros: Looks awesome Not too difficult to install Super cheap Again, it looks awesome Cons: The LED plate is straight while my roundel and badge have an arch so don't expect a 100% seal and fit but if done right this isn't noticeable and hopefully won't cause an issue with the longevity of the product. Also would be nice if it came with a basic pry tool and wire connectors (a kit). Obviously that would be at a higher price point but it would be a 1-stop shop transaction. No major cons here Note: Based upon previous reviews, it appears this product has been updated since. There were no holes in the LED plate like others have mentioned and the LED lighting does go around the entire item.

Trash item!! Installation is alot. Not worth it

Despite all the poor reviews I decided to forgo buying a burrito and invest in one of these instead. Verdict: Shoulda bought a burrito. Pros: It lights up and hasn’t fallen off my trunk yet. Cons: No instructions! Thankfully it was a semi-simple install on my 2007 E92. Removing the trunk lid liner then splicing the cable from my license plate light. Boom it turns on, great. Problem no cutouts to fit my BMW roundel had to modify. Problem 2: the diameter was exactly the same as my roundel so I had to do some modifications for it to fit properly. Conclusion: if you’re looking to do this there are probably better options out there. For all the work and extra effort out into making this work it wasn’t really worth the outcome. If you want something cheap and willing to do a little extra go for it.

Installed on my 2014 BMW X3 28i. Looks great, but it is not easy. To begin with, the rear BMW emblem will not come off separately from the silver mounting assembly. Install painter's tape around the painted surface and pry off the complete silver assembly. My assembly came off pretty easily with no damage. The BMW emblem will pop off from the inside. Here is where it gets interesting and you need confidence in yourself. First, you have to remove the inside tailgate panel completely. There are two hidden screws inside each handhold area, so be careful. From the outside, I had to drill a hole at the 6 o'clock position through the black plastic bracket that holds the silver assembly to the vehicle. That hole also had to go through the metal rear hatch panel to allow the wires to be sliced into the license plate light. Yes, I was nervous, but you have to go slow and look inside the rear hatch before you drill. The wire goes through the hole and completely into the rear hatch area. Clean everything with alcohol. Put the silver assembly back on the black bracket without the BMW emblem. Then adhesive the lighted roundel to your black mounting bracket, it fits pretty well. Now the BMW emblem goes on top of the lighted roundel. The lighted roundel does not fit the BMW emblem perfectly. The roundel is flat and the BMW emblem is concave. You have to build up the center of the emblem with two-sided tape and make sure the tape goes all the way to the edges before mounting. Then you can simply T-tap (Walmart) into the license plate lite.

Light looks awesome on the car, but if you are using this on your hood emblem as I did, you will need to make slight modifications to the emblem. The trunk emblem would have fit perfectly fine in the light, however, the hood emblem is slightly larger. I had to cut the chrome ring around the badge off in order for it to fit within the light.

Item was of great quality, easy to wire and it looks great! I actually bought 2 one blue for the front and one red for the back.. which is wired to my brake light and litghs up when I press brake pedal. I'm really happy with them.

It’s literally a light so it’s not much yo to speak on just made sure when I applied power it turns on and it does will tap it into the headlight power wire so it turns on with the headlights instead of just constantly running it feels sturdy not to flimsy

Nice quality. On time. No instructions on how to install.

Good product it’s different and stand out. Nice touch

Arrived way before expected, awesome product

Thanks

Not recommended! The light does not sit flat on the BMW logo. The two wires came off lose during installation. Bad product.