Parts N Go Corolla Passenger Side Fender Liner 2009-2010 Front Right RH Splash Guard - TO1249149, 5387502260

I bought a commuter car (beater) 2010 Corolla that the front bumper cover was very floppy on the passenger side, looking at it at home, I found it was missing the inner fender liner that ties all the front assemblies together. I found this fender liner on Amazon and figured, hey why not-the price is not bad at all. It arrived rapidly in a very small box, I figured there was no way this is correct. It was indeed the fender liner, rolled up into a very small package. I set it out in the sun, and it basically popped back into the correct shape. It installed easily and all of the holes all lined up with the factory holes/tabs. I installed it using a plastic trim rivet kit without issue. It stiffened up the bumper cover and tied the whole front end back together. 5 stars- it is formed and fit just right and worked well.

Why did you pick this product vs others?: Good

I had it installed, and there was no issue with the fit.

This was ordered for a 2009 Toyota Corolla and was described as fitting this car. Three issues with this fender liner: 1) Poor quality 2) Doesn’t fit or conform to the original fender on the car like the OEM fender did 3) Fastener holes for this liner don’t match up with the holes or mounting tabs on the fender As for the quality, it was packed and rolled up tightly in a very small box. This should’ve been the first sign because a quality plastic liner should not be able to be rolled up like that. I don’t know how to describe the material this product is made from….it’s not paper but it is definitely not a quality plastic. It looks and feels as if it would rip very easily and is too soft to be able to stand up to the rigors of being a fender liner. The fender liner doesn’t perfectly fit into the wheel well. The arch fits pretty good, but at both the front and back corners did not fit. The molding was too short to reach the bottom of the fender well and it didn’t cover the bottom areas like it should. I thought I could get around this because the material is so soft that it can just be “mashed” into shape, however, that wasn’t possible due to the next (and bigger) problem. The fastener holes on this fender liner do not line up at all with the fastener holes on the fender….not the holes themselves or the extended tabs where it’s designed to match up. There was no way around this problem because it would require more than just drilling new holes….there was no plastic tab to match up with the fender where it needed to be. Unfortunately, I couldn’t install this fender liner on the car immediately upon receiving it due to having hand surgery. So, it was just past the 30 day return window when I discovered that it wouldn’t work. I went ahead and attempted to contact the seller for a resolution since the fender liner being the wrong one wasn’t my fault, but was told that the 30 day return window had closed. So, I’m stuck with a fender liner that doesn’t fit but was sold to me as fitting.

We put this on a 2010 Corolla. We also purchased a set of 3 types of clips from amazon: https://www.amazon.com/dp/B07VY99191?psc=1&ref=ppx_yo2_dt_b_product_details. This was useful as none of the original clips could be salvaged. Two of the three types were needed for the installation. The liner fits onto the fender pretty well; the holes lined up after some pushing and shoving, as expected. The reason for 4 stars rather than 5 stars is that the finished result looks slightly sloppy. The original Toyota fender liner on the other side of the car fits perfectly, and the liner is snug against the fender at all points from left to right. This liner is not quite as firm, which results in a kind of wavy appearance, i.e., there are several places where the liner rises away from the fender making a small gap, maybe 1/4 to 1/2 inch or so. But it's not very noticeable and given the age of our car and the amount of money we saved we're pretty happy all in all.

GREAT PRICE AND FIT PERFECT

This inner fender well seemed like a great deal, but it doesn't fit perfectly as expected.

Kinda what I expected for price. It has been on my car for little while now so it I guess meets intended purpose

Perfect fit for 2010 Corolla S!

It would have good if clips came with this ,but it works.

Good

Does not fit properly