DEWALT Miter Saw Stand, Heavy Duty with Miter Saw Mounting Brakets, Tool Only (DWX725B)

There are a lot of things to love about this miter saw stand, and only a couple of drawbacks: pros: Rugged - you would have to work hard to loosen it - the legs have a large snap-in key and are sturdy. The levers to fold up the legs are large and thus are easy to depress. Easy to put together - basically, you just unfold the legs. Even when you have a non-standard (meaning non DeWalt) saw it isn't that difficult. I put my little 30 year old Makita sliding compound miter saw on with probably 2 hours of work total. I had to cut a piece of plywood, and because I wanted it to be nice, I sanded it and put on a couple coats of polyurethane. Then attached the brackets and the saw - about 1/2 hour all together including measuring. If it is a DeWalt saw, it will fit the brackets directly. Although it is nice to have that extra room to put stuff, so the plywood is useful. The directions to do this are very clear, by the way. Both sides of this stand extend making it suitable for decking and other projects that require long stock. Cons: The stops they provide are OK, but they are pretty small and if you are working with 2 x 12 or 4 x 4 (on my saw I need to put a backer board against the fence as the saw small and the blade is in the way). So I bought the BIG 12" versions - 1 roller and one 'stop'. Should have gotten 2 rollers as I find them far more useful. I don't rely on the stops for this stand. I'll probably toss the 6" ones that came with the stand. Here's the roller that fits it: DEWALT DW7027 Wide Roller Material Support Works great and you don't have to add as many quarters to the swear jar when the wider stock slips off the narrow 6" stops they provide. I put a couple of cinder-blocks under the legs and lay a 2 x 12 across them as a storage place for squares, pencils, kitchen sinks. You know how it is. This works especially well as I leave the saw out near my projects and just keep the stand and saw covered with a tarp, thus keeping my tools high and dry as well. Can't think of any other negatives.

Best miter saw stand out there. Stable and easy to set up

I am extremely satisfied with the DEWALT Miter Saw Stand (DW). This stand is a game-changer when it comes to portability and convenience for my miter saw. The stand is impressively lightweight, making it easy to transport and set up at different job sites. Despite its lightweight design, it has a robust 500 lb capacity, ensuring stability and durability even when handling heavy materials. One of the standout features of this stand is the leg locks, which allow for quick and effortless setup. The leg lock mechanism securely holds the stand in place, providing a sturdy foundation for accurate and precise cuts. It saves me valuable time and effort during setup and breakdown. The construction of this stand is top-notch, as expected from DEWALT. It is built to withstand tough job site conditions and frequent use. The materials used are of high quality, ensuring the stand's longevity and reliability over time. Additionally, the stand offers excellent versatility. It can accommodate a wide range of miter saws, making it compatible with different models and brands. The adjustable support arms provide added flexibility, allowing for easy customization to suit the specific needs of my projects. Overall, the DEWALT Miter Saw Stand (DW) has exceeded my expectations. Its lightweight and portable design, along with the leg locks for easy setup, make it a valuable tool for any professional or DIY enthusiast. I highly recommend this stand to anyone in need of a reliable and convenient solution for their miter saw setup.

The DEWALT DWX723 stand is a game-changer! Its heavy-duty build handles my saw securely, while the compact foldable design saves space. Setup is quick, and the weight capacity impresses. Perfect for job sites or workshops—highly recommend for durability and convenience!

I've used other miter saw stands, so when it came time to buy a new stand I knew what I didn't want. I didn't want loose fit, insecure saw mounting or anything that required tools to set up and adjust. This is a great stand and met all of my "didn't want" requirements. The legs are very sturdy and easily flip down and lock securely in place. The angle of the legs means no "walking" or tilting during cutting operations. The "base" is extruded aluminum and could easily hold two grown men - not that grown men should stand or lay down on it... The handle on the bottom makes is super easy to carry. Each end has a sliding extension and the lumber support may be mounted on the base or on the extension. This thing will handle 16ft. lumber with no problem. The first time I used it, I completed five mitered boxes 24'x36' and, using the stops for repetitave cuts, everything fit perfectly. The stops are stiff to raise and lower, but they can be moved with one hand. I wish the position adjustment on the supports had a easier way to place them in a precise position, but that would just add complexity. I can usually hit it after a set or two. Unfortunately, because I have a Rigid miter saw, I had to use a board with the saw mounting devices - but I really like the way they easily go on and off, locking securely into place while in use. If you happen to use a DeWalt saw, all the hardware is included for mounting without needing to cut a mounting board. This is one product that they got right!

Exelente producto, la base para sierra de gran calidad y lo mejor su precio . solo pague $6000. por ella.

Qualité de fabrication impeccable. Trépied solide et pratique pour ne scie à onglet Dewalt 20v. Très satisfait

Muy practico,ligero y economico, lo complemente con un par bases de soporte rockwell rk9034 jawstand xp de forma independientes para el corte de material largo (tambien los adquiri en amazon) En particular las palancas para abatir o intalar las patas es un plus muy comodo. es compatible con mi ingleteadora dws780 que es la mas grande tengo entendido, y a pesar de que no estaba indicada para este modelo me la jugue y estoy muy satisfecho. ademas funcionan como bancos de trabajo,tiene orificios de fabrica para sobreponer una madera y evita que se lastime el metal.

This is the best stand, sturdy and strong with the ability to add attachments to even do more. I own a heavy duty double compound 12 inch dual rail sliding Milwaukee miter saw, but this is the stand to support it. It is large for those big jobs, and can support a lot of weight and do it easy. Quality build, well thought out design, there is no contest when it comes to which mitre stand to buy.

I've used several of these over the years, and I must say that dewalt have addressed most of the quirks and niggles in this latest iteration. First of, it comes fully pre-assembled in the box, which is very useful, all you need to do is slide in the included adjustable mounts and bolt the included brackets to your saw and you're done, ready to go in minutes, literally! As for the little improvements; the old style stand had leg locking pins you had to push in to release, now, they've added rear mounted levers that "pull-in" the pins for much easier handling (and avoiding the ol nipping at you fingertips); small improvement, huge difference! Also, the locking of the extension beams used to be done with an awkwardly placed knob, which has now been replaced by a lever that's much easier to operate, again, small improvements... Overall very pleasantly surprised ; I was expecting the good ol' tried and true "built like a tank" stand, I actually got the "new and improved" version. Awesome. These are built to last, the heft and feel of the thing simply exudes quality and sturdiness. This is the one to get. Slight addition: this thing is huge at over 6 feet long even folded, which might be a concern for someone planning to move it around often from site to site, or with limited storage/cargo space when not in use. The dwx724 is the exact same heavy-duty stand in a 4 feet version that's much easier to store away or lug around... So unless you are planning to use it for lengthy material on a regular basis, you may want to make your life a little easier by going with the "shorty"...