DEWALT Wet Tile Saw, Masonry, 4-3/8-Inch (DWC860W)

I very rarely take the time to post a review here on Amazon and I buy a ton of stuff from them. I bought this saw to cut the cement board for my BBQ island project I am working on. I will probably end up using about 20 sheets of the 1/2" Hardibacker 500. I have read a ton of reviews about cutting this stuff and all of them stated that it was a pain to cut and the dust is extremely bad for your health. A lot of people end up putting a very low tooth count blade on their circular saw and wearing a proper 2 stage dust mask but the dust goes every where. After a ton of research I found this saw on Amazon. The saw arrived today and I was cutting with it this afternoon. Cutting the 1/2" Hardieboard was no kidding like cutting butter with a very hot knife. The cut edge is very smooth and it was really easy to follow my cut line. Like others have said, this saw feels very well built with one noted exception that many others have mentioned. The water line fitting hat sprays water on to both sides of the blade is plastic and feels like the same plastic used in drip line irrigation fittings. I won't dare to guess how long it wil last but I would be surprised it itmakes it a year. When it breaks I plan on using 1/4" copper tubing to make a replacement. The water hookup involves screwing a plastic flow restricter to the end of your water hose. For better control of stopping the water eyed I would recommend putting a small shutoff valve to the end of your hose and then attaching the flow restricter to the shutoff valve. As far as the blade arbor being an odd size I just have to say that there are quite a few 4 1/2" blades that already have the arbor reducing adapter in the blade. Those adapter can be removed from those blades and pressed into a 4 1/2" blade of your choosing. Overall I would rate this saw a 4.9 out of 5 stars just due to the plastic water fitting. I would purchase another in a heartbeat If I ever need to replace this one.

Bought this instead of the usual table slide tile saw because I knew I'd need some flexibility. Besides who needs another unitasker in the tool box? Saw Saw works great. A lot of comments about how easy it is to break the water injection assembly but given where it's placed it really shouldn't be much of an issue (yes a metal assy would be nicer). Cut the porcelain tile shown and it cuts with very, very little chipping - provided you watch your speed at the beginning and ending of the cut. Jig Making a good jig is critical unless you have special skills with a circular saw. Mine is a short term model but it clamps and provides a straight edge for the saw to ride against. So those halved width tiles have cuts that are nice and straight. Jig is also critical because the water tends to puddle and obscure the cut line. Predefining the cut line with a jig allows you to concentrate on keeping proper speed and not worrying about if you are on or near the line. Other - After one cut your crotch will be soaked. A lot of blowback at crotch level when using the water. - Power and water hoses tend to get tangled up as you go along though that's probably just me. Overall, very happy with it's performance.

Works well for cutting pavers, bought this to make angled cuts (20+) for a 65sq foot patio and it cuts through the material like butter with a 4 1/2in diamond blade. Cut quality is decent enough for edge cuts though the cuts will be hidden with poly sand. Wet cut function works well with a garden hose set to very low flow. Was originally going to buy a cheapie but have had good luck with DeWalt products over the years. I can imagine the tool will work even better on thin tiles.

The actual saw itself works fine the attachment however to convert this into a wet saw is absolute junk made out of plastic it broke three times I fixed it using epoxy in adding an email in with the epoxy to strengthen it now I'm looking for this piece made out of metal you wouldn't think it would be a big deal to add that for the cost. I would even pay more

I was concerned when I got this saw since there were some slightly negative comments regarding the water coupler/sprayer. I needed to cut several cordierite kiln shelves and wanted clean precise cuts while keeping the dust down. I considered buying the cheapest fixed blade table top saw, but I’m glad I purchased this saw. Besides cutting the cordierite shelves, I’ve used the saw to trim off the broken edges of a stone table. The motor is powerful enough to deal with the full cutting depth of the materials I needed to cut, the water connector provided the right pressure to keep the blade cool and eliminate stone dust clouds, and the built in safety breaker in the cord gave me the confidence that I wouldn’t be electrocuting myself. I think if I were doing small tile cuts, I’ll still need fixed table saw style cutter, but the circular rip saw configuration makes this a really handy and exceptional tool in my kit. Regarding the pictures, the stone table top on the propane fire pit is 3/4” thick and the additional thickness is an aluminum honeycomb 3/8”. With adhesive the thickest section I was cutting just over 1 1/2”, I had to use other tools the finish the job, but this saw did the bulk of the cutting thru stone, construction adhesive and aluminum. The pictures of the cordierite shelving show the clean edges of the cut, with the exception of where I paused to change my position, which resulted in the tool mark. Regarding my concern for the water coupler, it survived my use of this saw thru a couple projects. I also found that you can get replacement parts, including the water coupler online.

Great tool for making long rip cuts on 8"X48" porcelain tiles. The saw is a little heavy and requires a steady hand. Cuts were clean and I had no blowouts or breaks. It's also very messy... but well worth it. Just wear protection and use it outside. Definitely use a face shield with this. I wore safety glasses and still got debris in my eyes. I had no issues with the water valve like other reviewers, but I made an easy modification. get a cheap shut off for the end of a hose and then attach the line to it. This will allow you to use the shutoff to regulate the flow instead of the valve. Also provides a quick way to turn it off and on.

I bought this saw expecting a quality product from DeWalt. I dont normally write reviews but felt this needs to be known 1) the foot plate is light guage metal with light plastic adjustment set screws. 2) the pressure regulator housing is not secured. It comes apart at the slightest water pressure over 5lbs. 3) the water delivery hose is attached ony with ribbed inlet and outlet fittings that leak. 4) the water shutoff valve is also poorly made. Cheap plastic and does not completely stop the water flow. I wouldn't reccomended buying this product. Returned after only 15 minutes of trying to fix all the issues .

I bought this wet saw to cut porcelain tiles and granite countertops. It did both with ease (granite countertops needed a few passes) and I was pleased with the results. The saw is really powerful, but a few key design flaws really take away from this saws potential. This saw would be 5 stars if it weren't for the following issues. First, the blade is an oddly sized 4-3/8". 4-1/2" is pretty standard, and can be used, but you really have to force it into the guard without bending it. It can be tricky, and you can tell it's not meant to use a 4-1/2" blade. So it's easier to stick with the DeWalt brand 4-3/8" blades. Second is the arbor size. It's approximately 3/4", which is also an odd size. I believe the 4-3/8" replacement blade DeWalt makes specifically for this saw has a 7/8" arbor, which means you need to get a bushing to make it fit. I believe the replacement blade comes with a bushing, but why make a saw blade specifically for this one saw and produce it with an incorrect arbor size? Third issue is the shoe. It's completely open on the blade side making it really tough to start cuts. You can ride your saw guide with the motor side of the shoe, but the measurement between the outside of the blade and the motor side of the shoe is something like 3-11/16". So that adds an extra headache when trying to measure saw guide placement. The space between the cutting surface and the bottom of the motor housing is very small. So I ended up making a jig to hold my saw guide out and away from the saw because the motor wouldn't clear any clamps used to secure the saw guide. This saw is powerful and does cut well, but only after finding work arounds for all the design flaws. I'd recommend finding a different saw with a 4-1/2" blade. The headaches this saw caused doesn't seem worth it to me

I have been in renovation for 25 years and I would diffidently recommend this saw, I purchased it for rip cuts on 48 inch X 60 inch X 1/2 inch thick wall tile, works great and came with the hookup for a garden hose but it can also run off the DEWALT D36000S Wet Saw pump, that's how I use it.

Una gran herramienta para uso profesional

Es potente, el corte es poco profundo aún al máximo, la ventaja es el uso de agua para no hacer polvo, para ranuraciones para instalar tuberías o cables está bien.

Worked well, I was working outside in the rain and left the saw sitting in the rain with no apparent damage. Has enough power to cut large format tile 2'x2' at a decent speed. Even pushing it the motor slowed only slightly. Only complaint is the tile dust puddled in front of the blade on long cuts, so I had to slow down a little in order to see the line. Motor has enough clearance above the work to allow using a 1/2" thick guide for long cuts.

Lo use para cortar la loseta del baño y el corte lo deja perfecto y lo mejor de todo que ya no hay polvo.