VIPMOTOZ Dark Smoked Lens Full LED Front Fender Side Marker Light Turn Signal Lamp Assembly Replacement For BMW E82 E88 E90 E91 E92 E93 E60 E61 E83, Driver & Passenger Side

Looks awesome! E92 TiAg. I think it goes well but it could be cuz change looks impressive and down the months or years I might be saying the same about clear 😀. These fit 95%. They are slightly smaller than the stock ones so you could see the indentation (for my car the shape of the light is indented compared to the rest of the body). For those that can’t get it to stay, you need to push it toward the front of the car after getting the back in. I compared the hook to the original and they are the same size. For some reason the spring doesn’t push the casing forward enough so you have to do it yourself and it’ll be tight enough you won’t be able to pull it straight out. Nice and secure. I dry fit this first. Now the challenging part is how do you slide double sided tape? I installed one without removing the backing of 3M tape and it stays in place perfect. The other I tried to slide in and it was too sticky. I pried it off real quick and sprayed a lot of windex and quickly pushed it back (towards back of car) and in, then forward (toward the front of the car). It slid a little and went into place. Locked. Unfortunately, it’s a tad bit smaller than stock. So you can see the outline of the indentation. What I should have done was push back, in, slide forward and up. It’s fine if the top fits perfect and the bottom doesn’t cuz you can’t really see the indentation from under. Perhaps you could find some other solution that will work. I got the windex trick from a front lip install. Still very sticky. Maybe because it’s a vertical surface and the windex slides away. Looks great. Works. A little pricey for something that already was working but it’s a better deal than others that are 40-60% more. I was thinking of getting the sequential ones but this is fine. Good luck!

I’m going to start off by saying that these side marker lights are made of high quality materials and they are 100 percent plug and play for BMW e90/e91/e92. When I first tried attaching the lights to the oem connector it wouldn’t fit and I realized that this was because the two prongs inside of the light were just slightly bent (making it unable to plug into the connector) but after figuring it out, it was an easy fix and They slid right into the spot where the old lights used to go. I read some reviews that stated these are not oem size and this is not true, they are a perfect fit as you can see that they are from the picture. (There is no marking from the old light visible) I will add that I decided to seal the side markers into the car with some silicone to provide a water tight seal if I was you I wouldn’t install them without either doing this or using the enclosed 3m backing but once you peel back the backing of the 3m tape the lights become very difficult to install (because you need to move them around to snap into place) so I opted for the headlight silicone. Overall, these are high quality, sharp looking side markers Don’t hesitate to buy them you will be glad you did! I will update my review if there are any issues with these lights but I doubt there will be any.

UPDATE: Initially they weren't fitting, the electric connector prongs needed a very slight adjustment. After that they fitted perfectly. It's tricky to install these with the 3M tape since the installation require a small sliding motion, I guess these ones depend on the tape instead. That is both good and bad; good because of the guaranteed adhesion, bad because 1. there is no removing of the item without damage, 2. the tape is destined to wear with weather, 3. it may install slightly off to its intended position. I recommend a non-adhesive sealer instead. After all is said and done, I love the look of my car now. I will definitively keep these and continue buying in the future. They look amazing. The packaging was perfect. 3M tape at the back to guarantee seal. THEY DO NOT MATE WITH AN 2007 e92 COUPE. The connector pins are closer together than the ones on the original. See pictures. Will be returning them and trying my luck with other ones.

I installed these a week ago, but this morning the adhesive that kept the markers to the side of the car started coming lose. Before you install these, save yourself the trouble and remove the adhesive. OEM side markers do not contain any kind of adhesive because the proper fitment is snap-on. First push the clip into the side then the little ridge should line its way into the compartment. Snapped in perfectly into its natural position and doesn’t budge. Besides awkward fitment, the LEDs inside the light look great and the dark smoke lens is actually a lot darker than other aftermarket products I’ve gotten. If you’re not going OEM this is my next suggestion!

Easy to install, but before you do check the pins because there not align properly sometimes. I read some reviews about this issue in here and they were right!! I try to install the marker and didn't go in next thing I know the pin is crooked and had to realign the pin . Don't press too hard if the connector doesn't feel like going in check the pins!!! Otherwise there easily install the fit is perfect, color too and the best part is that you don't need to slide them in . Before removing the sticky tape back check the fitting and you guys will see that fits perfect without having to slide them in any way...! I got a 328i 2010 great product for me. sticky tape if you need to know sticks really well.. Great value for the money Very happy with my purchase Will definitely buy again the same product if need it in the future

These are an amazing product for the money. They are a huge upgrade aesthetically, especially on a black car. They are made very well, and use top of the line 3M body panel adhesive tape. Anyone that had trouble with them adhering clearly didn’t clean the fender removing any dirt, oil, adhesive etc left over from the previous side marker. I recommend using isopropyl alcohol or everclear (95% ethanol). Use a clean rag, get wet with the alcohol and wipe the area clean. There is not need to dry, it will evaporate on its own quickly. Don’t use brake parts cleaner or acetone as they will damage the paint, and would destroy any plastic or rubber they come into contact with. These are exceptional high quality for the price, using the best materials for adhesive and appearing to use top quality parts throughout. Buy without hesitation, you won’t regret it.

For all the people who complain about the double-sided foam tape and how difficult it is to install without destroying the foam, this is how you do it. First, clean the paint surface with alcohol and paper towel clear of dirt. Wire it up. When you're ready to pop it in, spray alcohol to the rear half of the paint surface. While the alcohol is still puddling on surface, slide it back compressing the spring while keeping the front lifted slightly. The alcohol keeps it slick and not sticking just yet. When the front tab lines up, push it in. Done. The alcohol will evaporate eventually and the glue will bond properly.

Look good one the car, the tinted looks way better than the clear factory ones, but there is a fitment issue. The clips it came with do not hold it firmly in place, one end always sticks up about a quarter inch, i had to gorilla glue it in place, which isnt easy, because the clips has sort of a spring too it, so the tention was pushing the one end away from the car, so i had to actually take a 2 by 4 and lean it against it too get it to stay pressed against the car for the glue to dry. They look good and price is good, but expect to have to problem solve a little bit in order to get it to stay in place.

Product shipped very fast was easy to install and made a huge difference in the aesthetic appearance of the car really love the way these look signal is bright and when they are off they blend in well were very easy to install they additionally come with double sided tape to ensure that they will not fall off the vehicle no dashboard lights had them on a few days and they were worth every penny

Amazing product. Super easy to install I didn’t even have to use any tools. Took me max 5 minutes to install and everything was plug and play. Looks amazing and haven’t given me any issues. I highly recommend this product to and any all people who are looking at this product.

These front fender side marker LED turn signal lights are great when they work. Check them thoroughly before mounting them on your car. Definitely better looking that the originals boring lights. Unfortunately two of the LEDs do not work on my driver's side unit. I am hoping they would just replace it rather than having to return both sides

Perfect

Fast delivery, fitment is perfect, really easy to install, much brighter than the original ones and you can clearly see the LEDs. Totally worth the money. I'm glad I got these ones instead of the cheap 20$ ones...