Auto Dynasty 4Pcs Dual LED DRL Headlights Assembly Compatible with Dodge Ram 1500 94-01 Dodge Ram 2500 3500 94-02, Driver and Passenger Side, Black Housing Smoked Lens

Let’s start with the negative on both turn signals the screw tap on the bottom where broken when I received them however it’s not a big problem just mount it to where you want it then epoxy it and it will hold just fine. The drl lights are bright and don’t know why everyone had such a problem hooking them up just ground the negative and hook both positives to a fuse tap and plug the tap in your radio fuse. Overall way better than oem

Very nice and packaged great and came in timely fashion and the seller answered the questions that we had great seller will be back for more stuff

They are very sleek and modern for my 98 ram. A good upgrade although the plastic is a bit too thin as I received one with a broken screw hole. Didn’t mind enough to send back decided to make another hole with a soldering iron as you are not able to see the hole when they are on my truck. The LED strip on either side are very attractive to look at, I have them hooked up to my ignition switch so they are always on as long as the key is turned. I do wish the blinker was attached to the rest of the light as they are two separate pieces that connect to each other, so just make sure they are on tight. Would recommend as you can always return if necessary but overall would buy again!

Very cheap quality product, side marker lights are flimsy, accent lights did not work as they should, leaked water into housing. Would not recommend one bit

Important to know is Get a piece of heat shrink for the drl board and electrical tape on top of that afterwards. Mount the board with a small zip tie on back of headlight (I drilled a hole big enough where it is not obstructing the housing.) drl wires into side marker. Yellow and black is for turn signal, green and black is for DRL and black to black (negative). Overall very easy to install. Make sure turn signal housing drl wires are ran out the way of mounting location. Side marker housing popped out on me after the 5th day. fitment on passenger side marker housing fitment is funny, but can be addressed very easily if need be. Love the look it gave my truck! 4.5 out of 5 never had a problem with beam adjustment as they come is perfect no adjustment needed at all.

These headlights look good but that’s about all they do good the halo in the drivers side corner peice burned out in the first 30 minutes of them being in the truck passenger side corner peice is starting to burn out the brackets are cheap plastic that at this point are broken and falling apart the whole corner peice on the driver side fell out going down the road and there held in with zip ties at this point while waiting on my Nixon off-road one peice headlights to come in don’t buy these headlights

The lights weren't hard to install and the wires were plenty long to be able to easily wire them in although the passenger side corner light did come with a ground wire that was broken basically cutting the length of the wire in half of what it should've been. The lights look nice however i just installed them yesterday and after checking they were secure, i drove to work the next morning. Once i arrived at work i realized the driver side turn light housing was completely gone. I drove up and down the road but couldn't find it anywhere. I'm really confused because it felt secure but obviously it wasn't. I'm wondering if the little screw on the bottom snapped the plastic and thats what made it fall. The passenger side corner housing also sits a little weird but i did see that was common on the reviews so i secured that one extra. Overall not a bad product but yeah didn't even last 24 or even 12 hours.

These headlights fit well and are super clear !