LeatherSoft Reception Chair, White/Black | Tufted Back and Seat Cushion, Black Metal Frame, Durable Construction, Commercial Use

Purchased seven of these chairs for use in an office waiting room. When they arrived, my wife, knowing I would not have time to put one together to see how it looked, put one together by herself by following the instructions. She is reasonably, but not exceptionally, mechanically inclined. She found assembly moderately difficult but succeeded resoundingly in about twenty minutes. The chair was solid, excellently upholstered and attractive. The remaining six chairs were assembled by the two of us in approximately 1&1/2 hours. These chairs look very attractive and professional. I would readily purchase more if needed. All the supplies were packaged in an easy to find manner. One box was not sealed fully and because of movement of the chair parts, the hardware package had broken open and the bolts & washers were loose in the box. Thankfully none were missing. Otherwise the quality of the packaging, the count for hardware and the assembly instructions and ease of assembly were excellent. One day upon entering the waiting room to get a client, I heard two of our clients facetiously discussing stealing the chairs because of how comfortable they were. Complements on the comfort has been received from many clients of radically different sizes and shapes. These chairs are fantastic.

ATTENTION! Do not pay any attention to the negative reviews on these chairs. They are obviously from people who have absolutely no skill when putting something together. Not sure how anyone is missing parts. All the parts come in a sealed package. First off, these chairs are excellent quality and the price is phenomenal. I shopped for 2 weeks to find the perfect chairs for my showroom. Out of all the chairs I researched (online or in person) these chairs were not only the most comfortable, but the most affordable. Guest chairs are NOT cheap and I came so close to not buying these because of all these invalid negative reviews. Tips: Use 2 people (it's much easier). VERY IMPORTANT: When you receive your chair lay everything out and dry fit everything together. Once you are ready to put the bolts in go ahead and hand thread ALL bolts in to the chair. DO NOT TIGHTEN ALL THE WAY. Once all bolts are hand threaded go ahead and shift the chair around until everything lines up perfectly. Then, tighten each bolt slowly and rotate to another bolt. DO NOT TIGHTEN ONE BOLT ALL THE WAY. Tighten one bolt a little bit, then go to another bolt, then to another bolt until you have all the bolts snug. DO NOT OVER TIGHTEN. Just snug the bolts. If you over tighten you will bend the metal and the chair will not sit straight. I never write reviews, but I am so happy with these chairs I just had to let everyone know. If you follow my directions you will be nothing but satisfied with your purchase. Not to mention you have Amazon.com that will always back you in you purchases. Don't hesitate. BUY THEM! I bought 4 and couldn't be happier.

This is the easiest way to assemble, and will save you time and frustration. So I ordered 7 of these chairs for our office. They arrive in a cardboard box that contains essentially the following: Left side frame piece, right side frame piece, two bent tubes that connect that frame sides, a seat cushion, a back cushion, and all hardware needed for assembly. Remove the wrap from all pieces. If you look at the picture, you can see which is left and which is right. Now lay the left side piece as if there chair is facing up from the floor (see pics). Take a screw and a washer (remember washer goes against screw, not behind rail). Insert the tube (with curve towards the bottom of the chair), top and bottom. Slide the screw/washer thru each one. Now take the seat cushion (notice on back is says 'front' for proper orientation), and line up the screw holes. Push the screw into the correct hole until it sort-of feels seated, than screw 3 or 4 turns. Next do the bottom one. Same thing, do not tighten, just make sure you get it so that it is correctly screwing in. Some will feel easy, some very tight, but you'll get the hang of it. The seat cushion screws are far easier to align than what we're about to do. Now do the right side, again, only turning about 3 or 4 turns. Now sit the chair up, and slide the back cushion (zipper side down). Starting on left side, repeat screw/washer procedure. Dont pay much attention to how 'straight' it appears as once you feel it 'seat' into the female side, you can screw it in. Do both left sides, then repeat for right side. It makes it easier when you push the cushion towards the frame. After all 4 back screws are loosely in, flip the chair and tighten the bottom screws, then return to the back and tighten them up. Done! I did have one chair where the back 4 screw holes are so far off, the chair will need to be returned. Other reviewers seem to mention this as a problem. I had 1 in 7 like that. edit: it appears the pictures didnt upload...sorry about that

Sedia tutto sommato comoda e robusta,peccato per una piccola spellatura sul bracciolo destro,montaggio abbastanza facile.

Son cómodas y resistentes, fáciles de armar

Super design . Chaise à la bonne hauteur de table . Spacieuse , a l'air solide . Trés contente de mon achat . Et livré avec rapidité . Je recommande vivement

Es el segundo sillón que pido. Tras devolver el primero por problemas en la calidad, el segundo presenta acabados pobres y desperfectos similares. Raspones y hasta óxido en una pata, la tela no cosida del todo, gomas de las patas sueltas y dobladas por dentro, por lo que no agarran bien, hilos metálicos de restos de las soldaduras que al retirarlos estropean el acabado, patas con raspones... Podría pensar que era una devolución pero es el segundo que pido y viene igual y parece que es que tiene esta calidad tan pésima por lo que desisto ya. Devolución. Por el precio que tiene se espera algo de calidad, no esto. No recomendable.

Looks nice and sturdy