iDesign Gia Stainless Steel Dish Sponge Holder Basket with Suction Cups, Ideal for Kitchen Sinks and Bathroom Organization, 2.25"D x 2.5"W x 5.75"H, Set of 1, Polished

I wanted something to hold a sponge and metal scrub pad so that they didn't make a mess of the back of my sink, and don't sit in a pool of dirty water. This solved the problem for me. It's large enough to hold those two items, and yes, it does stay stuck to the side of my steel sink (at least so far, after a couple of months). It doesn't rust, it's solid, and I recommend it. Update: After several months of use I'm still happy with this, although I've found that in order to keep the suction cups working well, I have to clean them once in a while. Not a lot to ask. Second update: I've been using this for a year on my stainless steel sink. About once every couple of weeks it slides down. I wash the suction cups and the part of the sink where I want it to stick and it's good for another couple of weeks. The suction cups are definitely flattening, though, and if I can find some reasonably priced replacements I'll get them. Third update: After about a year the suction cups were flat and would no longer stick. I removed them and found two small suction cups with steel hooks at the hardware store and hung the basket on the hooks. Works fine and should be good for at least another year.

This product stays in place and looks great in my sink. It’s not too big or too small and doesn’t get in the way of my dishes. It can fit two sponges. This is my second order as a gift to my mom, but I have been using this product for more than a year now and it does not rust! However, the suction gripper does get dirty and will need to be replaced. I love that this organizes my sponges inside my sink so from the outside you can’t see it.

UPDATE: I've used this method on 3 different sinks and had great results on all of them! I bought this knowing full well that the suction cups were the weak point in the design. I figured that I would eventually come up with a better mounting system since the suction cups were working for only a few minutes before giving up, even without the weight of the sponge. Since I had no immediate ideas (well, none that worked) I just left it behind faucet leaning on the backsplash. Last night when I got home, I noticed that my fiancée had moved it to a very peculiar spot. It was in the corner or the sink and it was holding strong. I just moved it to the opposite corner this afternoon, so that it wouldn't be under the drain pan, and I can't believe how good it's holding. It was a little tricky to get both suction cups to stick at first but I figured out a little trick. I was able to stick one side and then slide it over to where it's flat enough to stick the other side. Then you just slide it back over to center it. Be careful that you don't dig the holder into your sink and scratch it while sliding it back and forth.

Love the sponge holder. Glad I have it

Gave this to my daughter as she just moved into a house and needed one. I have a similar one and mine also has suction cups that work fine. We stuck it onto the inside of her stainless steel kitchen sink and in seconds it would just fall off. Tried 10 times , always fell off. BUT- KEEP READING—- A person there said to put water on the suction cups, so we did and then stuck it onto the inside inside of sink, I could not pull it off easily and it did not come off by itself. I was stunned that it need water. I will check bk with her shortly BUT I think the problem was solved.

I really wanted to love this iDesign sponge holder and in a lot of ways, it does the job. The matte black finish looks sleek and modern, and it blends in well with the rest of my kitchen setup. The size is just right for holding a couple of sponges and even a small scrub brush. The stainless steel frame feels sturdy, and I appreciate that it’s labeled as rust-resistant — time will tell if that holds up, but so far it hasn’t shown any signs of wear or corrosion, even after constant contact with water. That said, the biggest issue is the suction cups. They’re just not as strong or reliable as I hoped. At first, it stuck well to my stainless steel sink, but after a few days it started sliding down or falling off completely, especially when the holder has anything more than a light sponge inside. I’ve tried cleaning the surface and reattaching it, but the performance is inconsistent. I expected a little more in terms of stability. I ended up having to use extra adhesive hooks to keep it in place, which kind of defeats the purpose of using suction cups in the first place.

I was afraid it could be little too big and would bothered me to put dishes or other things in the sink, but it’s the perfect size and it doesn’t bother at all when I put dishes or pots in the sink! I’m very happy with my purchase!!

This held up well over many years - occasionally small rust spots were easily rubbed out, and I ended up having to replace the suction cups. But I’m talking YEARS later… so overall good!

Good one

Qualidade boa

Super handy little gadget. Blends with my white sink so it’s not noticeable. Had a few people ask me where to buy it. Sticks well, works well.

Utile e bello

The suction cups were warped/creased so it doesn’t stick well to the sink :( it’s a pretty color/design, just wish the suction cups weren’t damanged