18 Textured Truck Bed Liner Gallon KIT - Roll On Coating | DIY Custom Coat for Bedliner and Undercoating, Auto Body, Automotive Rust Proofing, Boat Repair (Gallon, Light Blue)

Yes, this product comes thick, you must carefully stir it and loosen it up “do not shake”. This product has contents that promote a slip resistant surface!I applied to my 16’ trailer wood surface and I am extremely pleased with the outcome! Looks beautiful, applied with relatively ease and dried pretty fast, however I will be abiding by the 7 day cure status. I asked the company about its durability and their response please me even more… I used a bed liner product on the metal and a colored Durabak product on the wood. It simply looks awesome!! Completely recommend..

Have never used a product like this before had clear instructions and worked out perfectly.

Wow it stinks - I was outside under a sun screen and was dizzy after the 2nd coat. Make sure you mask well so you can move fast, it gets thick quickly. I had seam sealed a medium size gap between the floor and the front wall, after finishing I wish I had also done the smaller gaps and used a bit larger bead size. I started panicking after the 1st coat as it looked awful, with the overlaps being darker. Just keep going. You will have to develop your own technique. I settled on using a brush to apply by dapping and then rolled over it to smooth and even it out. I have a 5'7" bed and only had a little left over - I do not think you could do a 8' bed with a gallon. It is a moisture cure, so I did my 2nd coat after 2 hours but should have waited longer. I was careful to offset the overlapping areas on the 2nd coat. I liked that you can chose different colors. Grey is not at great match for the silver truck, but I am putting a cover on soon, so I wanted to keep the heat down.

Needed to coat the heavy traffic areas of my boat. Sanded with 40grit blocks wiped clean with xylene and let dry. Taped off what needed to be taped and went to town rolling. 2 coats applied, waited about an hour and a half before applying second coat with the second new foam roller. Couldn’t be happier with outcome.

Ok....I purchased a gallon of this product to coat the bed of my classic Elcamino....First off I wanted white as white I could get to match paint color .. The first coat did not hide cosmetic dark spots..not real dark but it did require a 2nd coat...1 gallon did not cover the 2nd coat so I had to wait for another gallon to arrive a week later...applied 2nd coat after it arrived this coat covered cosmetic blemishes and achieved the look I was hoping for..it dried with a semi gloss white color that you could not look at in the hot sun..looks way better then the bare factory bed...in my opinion....also used it on the plastic nose of the car to cover body work where the nose was broken..two Coates did achieve the coverage I was looking for as well as providing more stability to the plastic...This product drys to touch in less then 45 minutes..that created a sense of ergency getting the job done...I didn't care for that but the finished product looks good...oh and forget about having left over coating...the minute you open that can the. Curing process starts...and it hardened to non usable pretty quick...Good stuff for my application but wasn't easy to apply...

I you are expecting a decent finish use something else. I am restoring a 98 chevy P/U. did all the body work and painted it and for my first ever paint job it came out damn near perfect. I opened the can of durabak and wasn't going to use it but I figured how bad can it be... I looks so bad I plan on putting the old plastic bed liner in over top of it! I had to use a lot of xylene to thin it and the ground up rubber would not roll or brush out smooth. clumped up in spots and the more you try and smooth it out the worse it gets. all I can say is what a huge disappointment. How would I even go about getting this stuff off? I am better off buying a bed from the junkyard and starting over. This product ruined a months worth of work and close to 1k in materials!!!

Good product, but I don’t know too many people who have a 2 inch roller laying around It can’t cost that much to add one to the kit for that price

Painted my Rhino 660. Goes on well, make sure you prep correctly. I had left over, so I put on two coats. No uv fade after 6 months in Arizona.