Manrose XF100T 2 to 20min Extractor Fan Timer 4" Bathroom Toilet 3 Year Warranty

This was a replacement for an existing Manrose fan which after 6 years wear was starting to give up. Easy to install and very quiet. Great value.

Great extractor fan, works as intended, you can adjust how long it runs for so it can get all the steam out of the bathroom after having had a bath/shower. It’s reasonably quiet whilst running. My old fan stopped working and this was more or less a like for like swap. Just make sure you knock off your fuse box before installing or your’ll be a crispy critter!

Bought this extractor as a direct replacement for our worn out old fan. £26.00 was the cheapest locally, £20.00 from Amazon plus free delivery as my total order was over £25. Took minutes to fit. Not the quietest fan but acceptable and doesn't wake my wife if it's running in the ensuite at night.

Very reasonably priced, easy to install as a replacement extractor fan and works well, as expected.

a nice looking product that works which works very well it replaces an identical model which had jammed and was clogged with fluff the over run works ver well and it is very quiet!

Seems to work well. Tightened screw a bit too tight and fan was really loud. Loosened it slightly and sound was much quieter although not silent. The timer doesn't work properly. Tried to set for 20 minutes but would not work. Would only switch off after 30 minute setting which is not ideal. Does extract fairly well and reasonably priced

I've just replaced an approx 10 year old Manrose fan with this one. I carefully chose another timer fan, with three wires coming down from the ceiling. The new one was an easy like-for-like replacement. My old fan was branded a "quiet" model, whereas this new one isn't. I'm afraid that I couldn't hear any difference between the two of them, so I would advise saving your cash and buying this basic model.

My bathroom extractor fan was pretty loud and also making some terrible screeching noises intermittently, so I decided to look into replacing it myself. I turned the electrics off and took the panel off to find the model number (XF100T) and so bought the same one (easier than having to drill holes to mount a different brand!). What I had not realised is that whilst my existing fan model was XF100T, whoever installed it originally had removed the timer module - this meant I only had a yellow and a blue wire going from the ceiling to the fan, and the red wire in the ceiling had been isolated with tape. So at this point I realised I should have ordered the XF100S model, which is the same as this but without the timer (pretty much the same price too). However, as it turned out, I was able to easily remove the time module from this unit and connect the two wires to my ceiling wires using a terminal block (which I took from my original fan!). So now this new model is wired in and working. It is MUCH quieter than the old one (which, judging by the state of it, was probably about 15 years old or more!). The only negative point is that the unit did not include all the necessary screws - the 4 screws that hold it into the ceiling were missing (I assume these should be included, along with rawl plugs). But other than that, it's perfect - was cheap and easy (ish!) to install! It's nice and clean too!