U Brands Glass Dry Erase Board, 70 x 47 Inches, White Frosted Non-Magnetic Surface, Frameless

Overall I really like this board an it looks much nicer than a standard white board. The install was pretty easy, but the included wall anchors are crap.I was able to put two of the fasteners into a stud so I only needed two wall anchors. The ones it comes with are terrible so I ended up going to the hardware store to buy two toggle bolts for a total of $1.50. Make sure you bring one of the mounts with you to ensure you get toggle bolts with screw heads small enough to fit inside the mount. Once I had those, install was smooth sailing. I thought it was missing some of the rubber gaskets that go on either side of the glass but they are actually two thin gaskets stuck together that you have to pull apart.Even with the poor wall anchor quality I gave it 5 stars as it's an easy fix and the value is still excellent at the price I paid ($44.50).

It was harder to hang than I thought, meaning the holes have to be drilled with the correct spacing otherwise the screws wont thread through the glass board. Two people are needed to hang it. Regular whiteboard markers don't show up as well. Cleans nicely and no staining.

I really like it. Much better than the melamine surface boards. It is more of a pain to install, but only took me maybe 1/2 hour. It is a little heavy and awkward, so 2 people are better, but not required if you can hold the weight for a few minutes. The pics are with some glass pens, the box came with a black one, and then I bought some fine tips from Quartet.How I installed:- The holes are 32" in apart on the 23 x 35, so since studs in many homes are 16" apart I just used some wood screws. The screws it came with might have worked as well.- I figured out the spot where I wanted the top left screw, and installed the little back mount there. You screw 4 of these small back mounts to the wall.- I held the board w/ 1 hand in the middle bottom, and loosely attached it the mount.- I then got it level using a small level, a little tricky, and used a pencil to mark where the other top back mount would go.- I detached the board, and then screwed in the other top mount.- I verified the new hole was level using a longer level, and that the centers were exactly 32" apart.- after attaching the 2nd top back mount, I put the board up.- I then put the bottom back mounts on with the board on the wall.The holes are pretty exact, so not much wiggle room. One of my bottom mounts was off by a very small amount, but by backing my screw out a 1/4 turn, I was able to get it aligned. It was a slight pain, but measure twice, as they say, and it should come out good.

I work from home and part of my work is presenting design solutions over the web. Sometimes, that work is presenting live whiteboard solutions.Most whiteboards are horrible, flimsy and ugly. They also have a reflectivity that results in glare on camera, which you just don’t expect and wind up having to compensate for with lighting and umbrellas. So, a glass board with the right lighting can surprise you.First, they’re reasonably light. I don’t recommend doing a one-person installation. That’s what I did and wound up with a 2 degree offset on the installation which annoys me and I’ll wind up fixing it. Go two-person, use a carpenter’s level and be happy.On camera, this has a great soft look. Make sure to use markers designed for a glass whiteboard and not a regular whiteboard or you’ll work a bit harder to keep it clean. Microfiber cloths clean this really well. Green markers don’t show up as well on camera.The mount system is actually very good. What you’ll likely find useful is to make a template on paper. What I mean by that is to lay out a grid of copy paper on a table and tape them all together. Lay the board on top and ensure the top is level to the top of the paper and draw the entire top edge so you have the line for the level.Then, using a marker tap into the four holes where the mount posts go. Take this sheet and put it up on the wall you’re going to install it. Ensure (several times, please) the line you drew is completely level at both ends. You’ll need a drill to install this, a power driver will help, too.Drill one hole at a time and verify the position each time with the white board. The kit is very good quality. As long as you successfully drill either two holes that are equally across the top or on the diagonal, you’ll install this correctly.

It writes great and looks great once put up. Design definitely looks better than the cheaper ones with hangers. However, installing it on the wall was very difficult. I assemble all my furniture and this is probably the hardest thing I ever did. The steps were straightforward, but you need to nail each mount in its exact place on the wall to fit the holes on the board and even 1/32 inch off means you can’t screw the board on. And you have to do this for all four holes. I did this with a marker and held the board against the wall to mark where the screwdriver should go in beforehand. But still ended up having trouble nailing in some of them - sometimes it’s literally like 1/50 inch off and the screws wouldn’t go in the mount. I ended up drilling my holes slightly bigger and painstaking adjusting each screw so they would fit.

Looks great in my home office 😁 it was a pain to install - but thankfully my brother helped with that.

Great size, easy to hang up, great quality. I used the board to make a calendar for my family, I’ve used many types of dry erase markers and they all wipe off with no issue.

I needed my dad’s helped to hang it. We need the proper tools for it like a drill and an eye level.You will need an extra hand to help you hang the other side.Overall I love it!! A+ on my test from now on!

Muy recomendado. Se ve elegante y fácil de instalar. El paquete llegó en muy buen estado y bien protegido. Llevo 8 meses de uso y no he tenido ningún problema. Se incluye un plumón negro de muy alta calidad.

Had this up in less than 30 minutes. Super easy to install. Came with just a few parts and it was an easy install. I did need a second person to help hold it up while I screwed it in. Great quality. Looks great.

Finally received in good order. Thank you.

excelente para el refrigerador porque no ocupa mucho lugar

Installed this white board in my workshop, not sure why I ever purchased cheap whiteboards that stained after a short time. Excellent surface with no mirroring after ink has been on for weeks. I would definately recommend this product if you are looking for a white board that will last for years. Crisp, clean, frameless look with pen tray is much more modern looking than a wood frame.